JAB Becker, officially J.A. Becker & Söhne GmbH & Co. KG, is a German manufacturer of lifting technology based in Erlenbach near Heilbronn. The company is particularly well known for hydraulic in-ground lifts, ram lifts and special lifting systems. These include systems for passenger cars, vans, commercial vehicles, buses, industrial trucks, construction and agricultural machinery, snow groomers and rail vehicles.
For JAB Becker vehicle lifts, we offer suitable rubber lift pads, rubber pads, rubber supports and rubber lifting pads for various model types. Depending on the vehicle lift, support plate and version, the diameter, height, hole pattern and support can differ significantly. For this reason, it is particularly important with JAB Becker not only to search by model number, but also to check the existing support plate carefully.
At Böck®, you will find rubber lift pads for JAB Becker vehicle lifts that can be used as replacements for worn or damaged pads. The model list provides initial guidance. However, a reliable selection should always be based on the dimensions and technical drawing on the respective product page.
Suitable model types
For these JAB Becker model types, we offer suitable rubber pads, rubber lift pads or relevant spare-part versions. The models listed are intended as a guide when searching for the correct rubber support or suitable support plate rubber pad.
DuoRam and support/carrier bridges
- DuoRam
- JAB DuoRam
- K23/3
- K36.1
- K36.2
- K35-S2
- HK35
- AE35
- AE35-L
- AE 35
- AE 35-L
- DuoRam K23/3
- DuoRam K35-S2
- DuoRam HK35
- DuoRam AE 35
- DuoRam AE 35-L
TwinRam and 2-ram lifts
- TwinRam
- TwinRam 35
- TwinRam 35 XY
- TwinRam 35 XY/1700
- TwinRam 35 S2
- TwinRam 35 S2/2500
- TwinRam 35 S2/2300
- TwinRam 35 S2/1300
- TwinRam 35 A/1500
- TwinRam 35 AE
- TwinRam 35 AE 1300
- TwinRam 35 AE 2300
- TwinRam 35 AE-S2
- TwinRam 35 Tele
- TwinRam Tele
- TwinRam 35 XY-VH Tele
- TwinRam 55
- TwinRam 55 S2/1500
- TwinRam 55 S2/2500
- TwinRam 65.1
- TwinRam 65.1 S2/2500
- TwinRam 350 A/N
- TwinRam 350 AN de luxe
- TwinRam 35-So
QuattroRam and 4-ram lifts
- QuattroRam
- QuattroRam 40 A-Align
- QuattroRam 65 A-Align
- QuattroRam 65 AN-S2
- QuattroRam 65 A/N-S2
- A/N-S2
Commercial vehicle, van and special systems
- MultiRam
- HVZ
- HVD
- HVV
- HVZ-DR 5
- HF
- HF3
- HF3 Tele
- HF5
- HF5 Tele
- HF8
- HF15
- HVZ 214-LM
- HVZ 214/190-LM
- HVZ 214-PF
- HVZ 214/190-PF
Rail vehicle lifting systems
- HS 2-60 DG
- HS 2-60.4 DG
- HS 2-60.5 DG
- HSS 214-So
- DG 60
- DG 80
- MD 214 (15T)
- HSZ 214-12 DG-EX
- MD 214 R-DG 1-80.1
Older JAB Becker model designations from spare-parts, shop and used-equipment sources
- TW 251/16
- TW-251/12
- Twin TW 251/12
- TW 250/PO 12
- TW 250/PO12
- TW 250/05N
- TW-251/08 S0
- TwinLift TW-250
- TWIN-LIFT
- TWINRAM 251
- MD 155 K22
- Twinram TR30
- Twinram 30 T
- TW 30 / 25
- JAB Twin Lift TW 251
How to select the correct rubber pads for older JAB Becker vehicle lifts
Especially with older JAB Becker vehicle lifts, the model designation alone is often not sufficient. Many designations come from type plates, used-equipment advertisements, spare-parts shops or older documentation. Examples include TW 251/16, TW-251/12, TW 250/PO 12, TwinLift TW-250, TWINRAM 251, MD 155 K22 and Twinram TR30.
Depending on the year of manufacture and version, these lifts may be fitted with different support plates, lifting plates and rubber lift pads. Dimensions such as 100 × 81 × 18 mm, 115 × 20 mm or a diameter of 120 mm should therefore not be used without checking. The decisive factor is always the existing part on your own vehicle lift.
As differences may exist depending on the year of manufacture, version or installed support plate, you should always measure the existing support plate yourself before placing an order. Compare the dimensions with the technical drawings and measurements on the respective product page. This helps to avoid incorrect orders and makes it much easier to identify the correct rubber lift pad for your JAB Becker vehicle lift.
Not sure? We can help with identification
Alternatively, you are welcome to contact us by email. For reliable identification, we require photos of the vehicle lift type plate, a top-view photo of the existing rubber pad and the dimensions of the support plate.
The most important measurements are the diameter, height and, if the rubber pad has more than one hole, the hole spacing from centre to centre. Information about the hole pattern, steel plate, existing support and condition of the old rubber pad is also helpful.
We carefully review your information and compare it with the available rubber pads and rubber lift pads. This gives you a practical assessment before you place your order. Not sure what to do next? We are happy to help.
Böck® quality for workshops and lifting technology
Rubber pads and rubber lift pads are small components, but they perform an important task in everyday workshop operations. They protect the vehicle’s lifting points, provide a better contact surface and replace worn support plate rubber pads on the vehicle lift.
At Böck®, we make sure that product identification remains clear and understandable. Our rubber pads and rubber lift pads stand for excellent quality, high load capacity and a long service life in everyday workshop use. We always keep common versions available so that worn pads can be replaced quickly.
We therefore always recommend comparing the product with the existing old part and the dimensions on the product page. If the model number, dimensions and support match, the correct rubber pad for JAB Becker can be selected much more reliably.
FAQ
- 1. Does every JAB Becker rubber pad automatically fit every listed model?
No. The model list is intended as a guide. Depending on the year of manufacture, version and installed support plate, the rubber lift pads may differ. Please always check the dimensions, hole pattern and technical drawing before ordering.
- 2. Which dimensions are particularly important when selecting the correct product?
The diameter, height and shape of the support are important. For rubber pads with several holes, we also require the hole spacing from centre to centre. A top-view photo of the old part is helpful for identification.
- 3. What quality do Böck® rubber pads offer and are they available?
Böck® rubber pads and rubber lift pads stand for excellent quality in everyday workshop use. They are robust, durable and designed for regular use on vehicle lifts. We always keep common versions available so that worn rubber pads can be replaced quickly.
